|Place of Origin:||China|
|Model Number:||equal Malleable Pipe Fittings Swage nipple|
|Minimum Order Quantity:||100piece|
|Payment Terms:||L/C, T/T, Western Union, MoneyGram|
|Item:||Equal Malleable Pipe Fittings Swage Nipple|
black iron pipe union,
iron plumbing fittings
Comparison table of equal Malleable Pipe Fittings swage nipple
BSPP Equal Malleable Pipe Fittings Swage Bs Thread Gas Reducing Nipple
In order to command the annealing operation grimly and improve the physical properties of materials,we use the gas annealing furnace of high calorific value.
To prevent leakage,we require every pipe fitting nipple needs to be tested by air-tight test.
Controlling calibre of the thread,parallelism,angle and tooth type,each nipple will be examined by ring gauge.
Pouring molten iron into box of pipe fitting , let it cool down and become the casting for rough casting . During casting , the temperature of molten iron , riser control all have great influence on the quality of pipe fittings . If not control well , then there are lots of problem like loose.
Parametric form of black pipe nipples
|Standard||Thread: ISO 7/1|
|Dimension||ISO 49, DIN 2950,EN10242|
|Chemical property||(C %2.4-2.9), (Si %1.4-1.9), (Mn %0.4-0.65), (P% <0.1), (S% <0.2%)|
|Physical property||Tensile strength>=350Mpa,Elongation>=10% Hardness<=150HB|
|Type||Beaded with ribs or banded with ribs|
|Beaded without ribs or banded without ribs|
|Surface||Galvanized/ no galvanized|
|Model||Elbow, Tees, Crosses, Bends, Unions, Bushings, Lateral Braches, Sockets, Nipples, Hexagon/Round, Caps, Plugs, Locknuts, Flanges ,Side Outlet Tees, Side Outlet Elbows and etc|
|Application||Suitable for pipe connect of steam, air, gas, oil and so on|
|Buyer’s drawings or designs are available|
|Package||Cartons without pallet|
|Cartons with pallet|
|Double woven bags|
Or as buyer’s requirements
|According to the quantities and specifications of each order|
|Normal delivery time is from 30 to 45 days after receiving the deposit|
Contact Person: Anne
Tel: +86 13524796263