|Place of Origin:||China|
|Model Number:||Galvanized Casting Iron Pipe Fitting|
|Minimum Order Quantity:||100piece|
|Payment Terms:||L/C, T/T, Western Union, MoneyGram|
|Color:||Galvanized & Black||Meterial:||Malleable Iron|
|Standard:||ANSI,BS,DIN||Surface Treatment:||Hot Galvanized|
|Head Code:||Square||Item:||Galvanized Casting Iron Pipe Fitting|
black iron pipe union,
iron plumbing fittings
Comparison table of Galvanized Casting Iron Pipe Fitting
Hot Dipped Galvanized Casting Iron Pipe Fitting Male And Female fittings Hexagon Bushing
The reason why we use the DISA Denmark, DJ AMF Japan, SINTOKOGIO Japan production line to produce the goods is to gurantee the quality of the goods .
The producer use the Oxford Instruments to test the quality of casting iron samples .
The maker use the high heat value nature gas anneal furnace , control the annealing process rigorously .
The producer try to test every products through air tightness test , to make sure no leakage.
The reason why they use the wire pipe fitting ring gauge to test is to control the thread, parallelism, Angle, tooth type strictly .
The standard of the pipe’s outlet is from 4x3”to 8x6’’.
The main point of the material of the goods is toughness.
The outside appearance is very glossy and not with any sand hole.
The main thickness of zinc coating exceeds the demands of ASME(86 mu),EN(70 mu),DIN (70 mu),SI(78 mu) and so on.
Parametric form of Galvanized Casting Iron Pipe Fitting
|Standard||Thread: ISO 7/1|
|Dimension||ISO 49, DIN 2950,EN10242|
|Chemical property||(C %2.4-2.9), (Si %1.4-1.9), (Mn %0.4-0.65), (P% <0.1), (S% <0.2%)|
|Physical property||Tensile strength>=350Mpa,Elongation>=10% Hardness<=150HB|
|Type||Beaded with ribs or banded with ribs|
|Beaded without ribs or banded without ribs|
|Surface||Galvanized/ no galvanized|
|Model||Elbow, Tees, Crosses, Bends, Unions, Bushings, Lateral Braches, Sockets, Nipples, Hexagon/Round, Caps, Plugs, Locknuts, Flanges ,Side Outlet Tees, Side Outlet Elbows and etc|
|Application||Suitable for pipe connect of steam, air, gas, oil and so on|
|Buyer’s drawings or designs are available|
|Package||Cartons without pallet|
|Cartons with pallet|
|Double woven bags|
|Or as buyer’s requirements|
|Delivery details||According to the quantities and specifications of each order|
|Normal delivery time is from 30 to 45 days after receiving the deposit|
Contact Person: Anne
Tel: +86 13524796263