|Place of Origin:||China|
|Model Number:||ASTM Beaded Elbows|
|Minimum Order Quantity:||100piece|
|Payment Terms:||Western Union, L/C, T/T, MoneyGram|
|Model Number:||OEM ASTM Beaded Elbows||Meterial:||Malleable Iron|
|Physical Property:||Tensile Strength>=350Mpa,Elongation>=10% Hardness<=150HB||Surface Treatment:||Hot Dipped Galvanized And Cold Galvanized|
|Testing Pressure:||2.5Mpa||Application:||Steam, Air, Gas And Oil Pipes|
malleable cast iron pipe fittings,
iron water pipe fittings
Tabular form :
Importance information :
Make comprehensive analysis of ASTM Beaded Elbows on the material of casting samples to ensure that the materials are excellent.
The average thickness of the zinc layer is higher than the standard requirements of ASTM Beaded Elbows for ASME (86 microns), EN (70 microns), DIN (70 microns) and Israel standard.
|Standard||Thread: ISO 7/1|
|Dimension||ISO 49, DIN 2950,EN10242|
|Chemical property||(C %2.4-2.9), (Si %1.4-1.9), (Mn %0.4-0.65), (P% <0.1), (S% <0.2%)|
|Physical property||Tensile strength>=350Mpa,Elongation>=10% Hardness<=150HB|
|Type||Beaded with ribs or banded with ribs|
|Beaded without ribs or banded without ribs|
|Surface||Galvanized/ no galvanized|
|Model||Elbow, Tees, Crosses, Bends, Unions, Bushings, Lateral Braches, Sockets, Nipples, Hexagon/Round, Caps, Plugs, Locknuts, Flanges ,Side Outlet Tees, Side Outlet Elbows and etc|
|Application||Suitable for pipe connect of steam, air, gas, oil and so on|
|Buyer’s drawings or designs are available|
|Package||Cartons without pallet|
|Cartons with pallet|
|Double woven bags|
|Or as buyer’s requirements|
|According to the quantities and specifications of each order|
|Normal delivery time is from 30 to 45 days after receiving the deposit
What is ASTM ?
ASTM—American Society for Testing and Materials
ASTMInternational , know until 2001 as the American Socirty for Testing and Materials (ASTM),is an international standard organization that develops and publishes voluntary consensus technical standard for a wide range of materials , products , systems,and services . Some 12575 ASTM voluntary consensus standard operate globally. The organization’s headquarters is in West Conshohocken , Pennsylvania, about 5mi (8.0 km) northwest of Philadelphia .
ASTM , founded in 1898 as the American Section of the Internationl Association for Testing and Materials, predates other standards organizations such as BSI (1901) , DIN (1917) , ANSI(1918) and AFNOR (1926).
Contact Person: Monica