|Place of Origin:||China|
|Model Number:||electrical galvanized flat seat union|
|Minimum Order Quantity:||50 pieces|
|Payment Terms:||L/C, T/T, Western Union, MoneyGram|
|Color:||White & Black||Meterial:||Malleable Iron|
|Standard:||FM/UL/ISO/ABNT||Sueface Teathment:||Hot Galvanized|
|Connect:||Thread||Material:||Malleable Cast Iron|
threaded pipe nipple,
malleable cast iron pipe fittings
Technical data of electrical galvanized flat seat union
|Standard||Thread: ISO 7/1|
|Dimension||ISO 49, DIN 2950,EN10242|
|Chemical property||(C %2.4-2.9), (Si %1.4-1.9), (Mn %0.4-0.65), (P% <0.1), (S% <0.2%)|
|Physical property||Tensile strength>=350Mpa,Elongation>=10% Hardness<=150HB|
|Type||Beaded with ribs or banded with ribs|
|Beaded without ribs or banded without ribs|
|Surface||Galvanized/ no galvanized|
|Model||Elbow, Tees, Crosses, Bends, Unions, Bushings, Lateral Braches, Sockets, Nipples, Hexagon/Round, Caps, Plugs, Locknuts, Flanges ,Side Outlet Tees, Side Outlet Elbows and etc|
|Application||Suitable for pipe connect of steam, air, gas, oil and so on|
|Buyer’s drawings or designs are available|
|Package||Cartons without pallet|
|Cartons with pallet|
|Double woven bags|
|Or as buyer’s requirements|
|Delivery details||According to the quantities and specifications of each order|
|Normal delivery time is from 30 to 45 days after receiving the deposit|
Outline of electrical galvanized flat seat union
1-1/2" size conical electrical galvanized joint malleable iron union flat seat
To insure high quality of electrical galvanized flat seat union,we applied the imported DISA from Denmark,automatic product lines from DJ AMF and SINTOKOGIO Japan into production .
The spectrometer of Oxford Instruments has applied to test the quality .
We use the gas annealing furnace of high heating value,which is to control the annealing procedure strictly and improving the physical performance.
Different between ASTM and DIN :
ASTM—American Society for Testing and Materials
ASTMInternational , know until 2001 as the American Socirty for Testing and Materials (ASTM),is an international standard organization that develops and publishes voluntary consensus technical standard for a wide range of materials , products , systems,and services . Some 12575 ASTM voluntary consensus standard operate globally. The organization’s headquarters is in West Conshohocken , Pennsylvania, about 5mi (8.0 km) northwest of Philadelphia .
DIN –Deutsches Institut fur Normung
Deutsches Institut fur Normung e.V. (DIN; in English , the German Institute for Standardization ) is the German national organization for Standardization and is the German ISO member body . DIN is a Registered German Association (e.V.) headquatered in Berlin . There are currently around thirty thousand DIN Standards , covering nearly every field technology .
Contact Person: Anne
Tel: +86 13524796263