|Place of Origin:||China|
|Model Number:||Malleable Iron Tees 90 degree|
|Minimum Order Quantity:||100piece|
|Payment Terms:||Western Union, L/C, T/T, D/P, D/A, MoneyGram|
|Standard:||4x11/2 Inch Malleable Iron Tees 90 Degree||Material:||Iron|
|Size:||4x11/2 Inch||Surface Treatment:||Hot Dipped Galvanized And Cold Galvanized|
reducing tee pipe fitting,
iron plumbing fittings
Summary of Malleable Iron Pipe Fitting Tees
There are several types of malleable cast iron.
Black heart malleable cast iron is mainly used to produce the iron casting parts with impact, shake or torsion functions. Normally used to produce rear axle housing castings, spring bracket, low pressure valve body, pipe fittings, tools and wrenches. Black heart malleable cast iron is also called as ferritic malleable cast iron.
Pearlite malleable cast iron has higher strength, hardness and abrasive resistance. So, it is mainly used to produce the abrasion resistant parts for motive power machinery and agricultural machinery.
Malleable Iron Tees banded equal 90 degree with casting process
|Standard||Thread: ISO 7/1|
|Dimension||ISO 49, DIN 2950,EN10242|
|Chemical property||(C %2.4-2.9), (Si %1.4-1.9), (Mn %0.4-0.65), (P% <0.1), (S% <0.2%)|
|Physical property||Tensile strength>=350Mpa,Elongation>=10% Hardness<=150HB|
|Type||Beaded with ribs or banded with ribs|
|Beaded without ribs or banded without ribs|
|Surface||Galvanized/ no galvanized|
|Model||Elbow, Tees, Crosses, Bends, Unions, Bushings, Lateral Braches, Sockets, Nipples, Hexagon/Round, Caps, Plugs, Locknuts, Flanges ,Side Outlet Tees, Side Outlet Elbows and etc|
|Application||Suitable for pipe connect of steam, air, gas, oil and so on|
|Buyer’s drawings or designs are available|
|Package||Cartons without pallet|
|Cartons with pallet|
|Double woven bags|
|Or as buyer’s requirements|
||According to the quantities and specifications of each order|
|Normal delivery time is from 30 to 45 days after receiving the deposit
We using spectrum analyse to check the cast iron of Malleable Iron Tees 90 degree sample ‘s quality
In order to improve the physical properties of the material ,we control the annealing process strictly.
Air tightness test to every Malleable Iron Tees 90 degree, to ensure there is no leakage
No strict size control ,no accuracy thread.
Outlet range is from 1/8”~8”
Contact Person: Anne
Tel: +86 13524796263