|Place of Origin:||China|
|Model Number:||figure number 90|
|Minimum Order Quantity:||100piece|
|Payment Terms:||Western Union, L/C, T/T, MoneyGram|
|Color:||Galvanized & Black||Meterial:||Malleable Iron|
|Standard:||ANSI,BS,DIN||Surface Treatment:||Hot Galvanized|
|Standard||Thread: ISO 7/1|
|Dimension||ISO 49, DIN 2950,EN10242|
|Chemical property||(C %2.4-2.9), (Si %1.4-1.9), (Mn %0.4-0.65), (P% <0.1), (S% <0.2%)|
|Physical property||Tensile strength>=350Mpa,Elongation>=10% Hardness<=150HB|
|Beaded with ribs or banded with ribs|
|Beaded without ribs or banded without ribs|
|Surface||Galvanized/ no galvanized|
|Model||Elbow, Tees, Crosses, Bends, Unions, Bushings, Lateral Braches, Sockets, Nipples, Hexagon/Round, Caps, Plugs, Locknuts, Flanges ,Side Outlet Tees, Side Outlet Elbows and etc|
|Suitable for pipe connect of steam, air, gas, oil and so on|
|Buyer’s drawings or designs are available|
|Cartons without pallet|
|Cartons with pallet|
|Double woven bags|
|Or as buyer’s requirements|
|According to the quantities and specifications of each order|
|Normal delivery time is from 30 to 45 days after receiving the deposit|
1,The equipments from DISA Denmark, DJ AMF Japan, SINTOKOGIO Japan widely used in our malleable iron elbow productline, ensures the stability of product quality.
2,we use spectrometer from Oxford Instruments to check the material's quality
3,we use high heat value natural gas annealing furnace, strictly control the annealing process, improve the physical properties of the materials
4,we use close-grained, high strength, impeccable steel & plate scrap as the raw material, because the quality of the steel is the starting point of the fittings of excllent quality.
5,Accurate threads are processed that comply with the precise standards, such as ASME, EU, BS, DIN, etc. The threads have an accurate structure, so the thread length and straightness to allow them to easily engage threaded pipe.
6,The pipe fittings have outlets ranging from 1/8” through 8”
7,Good toughness with long working life.
8,Smooth surface without any sand hole
9,avg. thickness of zinc coating is higher than 86 um specified in ASME, EN(70um), DIN(70um), SI(78um)
Contact Person: Anne
Tel: +86 13524796263