|Place of Origin:||China|
|Model Number:||figure number 90|
|Minimum Order Quantity:||100piece|
|Payment Terms:||Western Union, L/C, T/T, MoneyGram, D/A, D/P|
|Standard:||ANSI||Surface Treatment:||Hot/Cold-dipped Galvanized|
|Thread:||ISO 7/1||Head Shape:||Round|
malleable cast iron pipe fittings,
iron plumbing fittings
Sizes Details for street elbows 90 degree
· Material:malleable iron
· Type: FM elbow
· Head Code: Round
· Standard:ANSI, BS, DIN
· Packing:wooden cases or as cusdtomers' demands
· surfacetreatment:painting galvaized or as customers' demands
Product Description of street elbows 90 degree
We are manufaturer of malleable iron pipe fittings about 24 years, we seized each opportunity to consolidate its strength, and has finally developed into what it is today, a large-scale enterprise group with advanced technology, equipment and strong comprehensive strength,knows for its complete ranges of products, large producing capacity,high quality, etc.
The quality ensuring of Malleable iron elbow is controlled by full automatic product-lines of DISA Denmark ,SINTOKOGIO and DJAMF Japan.
The spectrometer of Oxford Instruments we bought for analyzing the quality of malleable iron samples.
Higher heating value gas annealing furnace was assembled in product-line to improve material physical characteristics.
In order to improve material physical characteristics ,we set a higher heating value gas furnace to control the annealing process strictly .
we use close-grained, high strength, impeccable steel & plate scrap as the raw material, because the quality of the steel is the starting point of the fittings of excellent quality.
Outlet size of pipe fitting is from 1/8”to 8” .
To make sure the long time using life ,it is necessary to keep good toughness .
No any and hole discovered on surface
Scopes of street elbows 90 degree as the following format.
|Standard||Thread: ISO 7/1|
|Dimension||ISO 49, DIN 2950,EN10242|
|Chemical property||(C %2.4-2.9), (Si %1.4-1.9), (Mn %0.4-0.65), (P% <0.1), (S% <0.2%)|
|Physical property||Tensile strength>=350Mpa,Elongation>=10% Hardness<=150HB|
|Beaded with ribs or banded with ribs|
|Beaded without ribs or banded without ribs|
|Surface||Galvanized/ no galvanized|
|Model||Elbow, Tees, Crosses, Bends, Unions, Bushings, Lateral Braches, Sockets, Nipples, Hexagon/Round, Caps, Plugs, Locknuts, Flanges ,Side Outlet Tees, Side Outlet Elbows and etc|
|Suitable for pipe connect of steam, air, gas, oil and so on|
|Buyer’s drawings or designs are available|
|Cartons without pallet|
|Cartons with pallet|
|Double woven bags|
|Or as buyer’s requirements|
|According to the quantities and specifications of each order|
|Normal delivery time is from 30 to 45 days after receiving the deposit|
Contact Person: Monica